TCP-10 | 1-11/16″ Temperature CCL Tool

The 1-11/16” Temperature/CCL Pulse (TCP-10) is a muti-sensor integrated tool to measure borehole Temperature and locate Casing Collars.  The platinum RTD (Resistance Temperature Detector) provides high resolution temperature readings with fast response.

Tool applications include: Depth correlation – Finding cement top – Locating fluid entry – Identifying gas leaks and injection zones

Request Quote
Go
Download PDF

Applications

Borehole fluid temperature
CCL to temperature correlation

Features

Rated for high-temperature and high-pressure environments
Open basket design through which fluid can easily flow for accurate measurement
CCL outputs a line shake signal to the surface
Temperature tool outputs positive pulses calibrated to 20 counts/°C
Compatible with most surface systems
Electronic design verified for 1 hour operation at 415°F to ensure reliability
Sour service compatible materials
Proudly designed and manufactured in Canada
 Tool Operating Voltage 100-150 VDC  Tool Length (make-up) 92.7 cm (36.5 in)
 Tool Operating Current 20-30 mA  Tool Length (shipping) 94.5 cm (37.2 in)
 Output Pulse Amplitude Positive ~10 VDC  Tool Weight 7.0 Kg (15.5 Lb)
 Output Pulses Width 25 µS  CCL Point from Top of Tool 22.86 cm (9.0 in)
 Max. Pressure 172.4 Mpa (25,000 PSI)    
 Max. Temperature 204°C (400°F)  Borehole Fluids Oil – Fresh Water – Brine
 Tool Diameter – OD 42.85 mm(1 11/16 in)  Top End Connector Contact Socket Go Female

I'd like to get a quote on TCP-10 | 1-11/16″ Temperature CCL Tool

Products related to TCP-10 | 1-11/16″ Temperature CCL Tool

TTP-11-small

TTP-11 | 1-11/16" Temperature Pulse Tool

Pulse Tools, Temperature
The 1-11/16” Temperature Pulse Tool (TTP-11) measures borehole fluid temperature. The TTP-11 have a GO pin Feed-Through to allow negative-voltage powered tools to run in combination (for ex. Noise tools). Tool applications include: Finding cement top, locating fluid entry, identifying gas leaks, and injection zones. The TTP-11 tool measures fluid temperature by measuring the resistance of a platinum RTD (Resistance Temperature Detector) inside a pressure probe. The measurements from the low mass probe results in high resolution data with fast temperature response.
TCP-10-small

TCP-10 | 1-11/16" Temperature CCL Tool

Casing Collar Locator, Pulse Tools, Temperature
The 1-11/16” Temperature/CCL Pulse (TCP-10) is a muti-sensor integrated tool to measure borehole Temperature and locate Casing Collars.  The platinum RTD (Resistance Temperature Detector) provides high resolution temperature readings with fast response. Tool applications include: Depth correlation - Finding cement top - Locating fluid entry - Identifying gas leaks and injection zones
GRT-10

GRT-10 | 1-11/16" Gamma Ray Pulse Tool

Gamma Ray, Pulse Tools
The DSS 1-11/16” Gamma Ray pulse Tool (GRT-10) measures the gamma radiation level of the formation derived from natural isotopes. It can be used as a depth correlation device between cased and open holes. This tool is comprised of a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. The GRT-10 outputs 25 µs pulses in response to gamma radiation within the well.
GRC-10

GRC-10 | 1-11/16" Gamma Ray CCL Tool

Casing Collar Locator, Gamma Ray, Pulse Tools
The DSS GRC-10 Is a 1 11/16” multi purpose pulse Tool (GRC). This tool includes a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. It can be used as a depth correlation device between cased and open holes. It also includes a magnetic device that detects the changes in metal mass of a casing collar as it moves through well casing. The detector is a coil mounted between two opposing magnets. As the tool passes a collar; the magnet flux around the two magnets disturbed and induces a low frequency voltage.
GRT-20

GRT-20 | 2-3/4” Gamma Ray Pulse Tool

Gamma Ray, Pulse Tools
The DSS 2 3/4” Gamma Ray pulse Tool (GRT) measures the gamma radiation level of the formation derived from natural isotopes. It can be used as a depth correlation device between cased and open holes. This tool is comprised of a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. The GRT-01 outputs 25 µs pulses in response to gamma radiation within the well.
CCL-20

CCL-20 | 2-3/4” Casing Collar Locator

Casing Collar Locator, Pulse Tools
This logging CCL tool is a magnetic device that detects the changes in metal mass of a casing collar as it moves through well casing. The detector is a coil mounted between two opposing magnets. As the tool passes a collar; the magnet flux around the two magnets disturbed and induces a low frequency voltage. The voltage difference in the coil is amplified onto the wireline